2016年9月26日星期一

Induction heating equipment debugging and maintenance

Induction heating equipment debugging and maintenance
Our company not only provide professional induction quenching furnace process, at the same time also has a strong after-sales service center, ensure long-term and wide range of system services. For the enterprise production problems and difficulties encountered in providing guidance to help. We believe that through our continuous efforts and pursuit, in the familiar induction heating field to provide users with value services. So how do the induction heating equipment for installation? How to debug? Routine maintenance and how effective? Today let's detailed answers:
1. Check the contact line of ac contactor ablation, loose connection or not.
2. Measure the insulation of the cooling water resistance. With the ohmmeter measuring tube set of the resistance to ground water, the minimum should be not less than 300 check evaporation pan of evaporative cooling electronic value, its resistance to earth should not be less than 600 kq.
3. The valve gate and the filament cooling water hoses (generally for rubber hose), near the - end of the tube heated easy ageing, be timely replacement for aging to the broken pipe.
4. To make a case internal cleaning the dust, wipe dust on the hv porcelain and insulation support. Note for centrifugal fan damper wire sweep the dust on the net, in order to avoid air volume reduced after the air inlet is blocked.
Using medium frequency furnace technology, can make the best comprehensive mechanical properties of castings, the indicators exceed national standard, effect is good, is the first choice for heating industry products.

没有评论:

发表评论